The load bearing capacity of a laminated glass pane changes with temperature. In blast protection, laminated glass panes with a Polyvinyl Butyral (PVB) interlayer are usually employed. The post-crack response of the laminated pane is determined by the interlayer material response and its bond to the glass plies. An experimental study has been performed to determine the effects of temperature on the post cracked response of laminated glass at a test rate of 1 m/s for PVB thicknesses of 0.76 mm, 1.52 mm and 2.28 mm. Tensile tests were carried out on single cracked and randomly cracked samples in a temperature range of 0 °C–60 °C. Photoelasticity observation and high speed video recording were used to capture the delamination in the single cracked tests. Competing mechanisms of PVB compliance and the adhesion between the glass and PVB, were revealed. The adhesion showed an increase at lower temperatures, but the compliance of the PVB interlayer was reduced. Based on the interlayer thickness range tested, the post-crack response of laminated glass is shown to be thickness dependent.
