In the ‘filled closed’ containers, the cap removal torque and the sealing of the contents are two crucial criteria in the closing quality, and the consumer perceives these two parameters as constituting a guarantee of packaging integrity. This work looks at the experimental study and the finite element analysis of the maximum torque of a metal cap with a liner over a glass bottle. For studying parameters influencing the cap removal torque (twist-off torque), several experiments and simulations were conducted in order to evaluate the maximum torque of a loose crown cap. A test bench was built to measure the torque required to slide a cap liner on the top of a glass bottle, and the result of the experiment is compared with the predicted torque given by an axisymmetric finite element (FE) analysis. Since the behaviour of the cap liner is hyperelastic, compression and friction tests were conducted to evaluate the elastic properties and the non-linear static friction behaviour of the elastomer seal. Contact regions, material non-linear elasticity for the liner and large displacement options are included in the FE model in order to describe the evolution of the contact area and the distribution of contact pressure as a function of the applied force. The predicted maximum torque is then calculated by a numerical integration scheme over the contact surface, using an experimental coefficient of static friction as a function of the normal pressure. The predicted torque shows good agreement with that measured through experiments, thereby making it possible to understand the influence of the liner on the cap removal torque of a glass bottle.
